Use Motorcycle Heated Grips Technical parameter...
Solat Motorcycle Heated Grips Co., Ltd , As One of the Largest OEM-Quality Motorcycle Supplier in China. We Can Supply Various Stable OEM-Quality Motorcycles Heated Grips and ATV for Our Customers.
We can supply many models of Motorcycle and ATV heated grip, warm your hands in cold winter, Your hands will stay warm and comfortable … even on colder day!
FAQ of Motorcycle Heated Grips and ATV :
1. Caution of Motorcycle Heated Grips and ATV
- (A) there are dia 23mm and 25mm in accelerograph parts and the steel ring, please use the part based on your need.
- (B) The right grip must along oil discharge direction revolving, only then allow loading in the accelerator module, otherwise refuels the angle to be small, the vehicle speed is limited.
- (C) The traditional grip refuels with the oil discharge limit is depends on the accelerator to protrude the organization control, but this grip is depends on the handle’s lead wire installment structure to control the accelerator the slewing area, has nothing to do with the accelerator shape, therefore this grip applicable scope is broader.
- (D) Installs when shuts off the left grip’s power switch, forbid strictly on the grip plug and outlet short circuit meeting, otherwise burns out.
- (E) Adjusts the left grip on temperature knob, if indicating lamp brightness change for stepless accent warm, does not change for keeps off the position.
- (F) Cannot surpass 12----15 volt voltage uses, also must be the direct current. The alternating current cannot move warm! Positive and negative installs extremely instead can move warm, the indicating lamp is not bright.
- (G) The left grip’s red plug connect with the positive electrode, the black plug connect with the cathode
- (H) Cannot meet the battery both sides directly, otherwise when forgets to turn off the grip to exhaust the electrical energy, but will not be able to damage the battery, recharges the battery to restore the vigor
Motorcycle Heated Grips and ATV Technical parameter:
- (A)Grip resistance is 10 ohms, working voltage is 12 to 15V direct current, the power is biggest when 30 watts, lowest 5 watts
- (B)Heating core highest withstanding temperature 200 degrees, rubber cover receives the max temperature is 120 degrees
- (C)Grip’s inside dia is 26mm,the steel ring’s inside dia has two size with 22.5mm and 25.8mm, rear part locating ring inside dia is 22.5mm, the different steel ring and the rear part locating ring may be suitable for the outer dia from 19 to 26mm metallic pipe
- (D)Grip’s main length is 125mm, outside dia is 35mm
- (E) When the ambient temperature is 5 degrees, the grip’s surface temperature is highest amounts to 75 degrees
- (F) Overvoltage protection, when the voltage rises from 15V to 20V the power reduces gradually, when the voltage surpasses 25V, power source protection is automatically shut-off
2. Other Question for Motorcycle Heated Grips and ATV :
